Epoxy Floor Repair in South Bend, IN
South Bend Premier Epoxy Flooring does epoxy floor repair in South Bend, IN, whether the coating is peeling where the tires park or just worn dull. Some floors need a sanded recoat, and some have to come up to bare concrete. We also work in Mishawaka, Granger, Osceola, Niles and Edwardsburg.
Request a quote
Tell us which floor and what it looks like today. We will call you back.
There is a test which you can do. Use a putty knife under a chipped edge. If it lifts in sheets, then we will need to grind it off. If there are just small chips coming off and it's firm around, then we can repair it.
- Bond checked before a patch is quoted
- Sanded and recoated while the old coat holds
- Failed coating ground off to bare concrete
- Moisture checked before the new coat goes down
- Cracks under the old coat repaired first
Estimate your floor
Typical prices per square foot for South Bend jobs, from the source below. Your quote follows a look at the job.
$1,800 to $2,160
Call (574) 800-4334 for your priceAt a glance
| Item | Typical figure | Source |
|---|---|---|
| Epoxy floor repair, US | $500 to $1,600 | Fixr, garage floor repair cost |
| Single epoxy coat, local | $4.10 to $4.90 per sq ft | Homewyse 46601, 2026-09 |
| Old coating removal | Adds $1 to $2 per sq ft | HomeGuide, epoxy flooring cost in Houston, TX |
| New epoxy floor, 2-car, local | $3,660 to $5,970 | Homewyse 46601, 2026-09 |
| Recoat window | 7 days, then sand first | Sherwin-Williams ArmorSeal 1000 HS |
| Water-based epoxy lifespan | 3 to 5 years | HomeGuide, epoxy flooring cost |
Epoxy Floor Problems We Fix
What a failing coating looks like, and what each problem usually takes.
Peeling Under the Tires
It usually happens from hot tire pickup, because warm tires pull. If it's happening, then the bonding is probably poor. And if it's a bonding problem, then we need to check the entire floor, not just the tracks.
Bubbles and Blisters
If it's a new floor, then there might be some air coming out of the concrete. But if it happened years later, then there could be some moisture coming from below. Before we do any patching, we need to find out if there is indeed moisture.
Chips and Gouges
This usually happens when you drop tools or drag a mower deck. If there's firm coating around it, it's a small repair. We sand the edges, fill the hole and apply fresh flake on top. On flake it will not be as visible as on a solid floor.
Dull and Scratched Floors
It involves scrubbing and a degreaser. Then we apply one fresh coat on top. Given that it's quite trivial work, it's usually the cheapest fix on the page.
Other Coating Problems
Yellowed Epoxy
Plain epoxy usually darkens or yellows, especially by a sunny door. So what we do is apply a UV-stable polyaspartic topcoat on it. And if it's yellow, then you might consider recoating it in a color.
How Much Does Epoxy Floor Repair Cost?
Epoxy floor repair usually costs $500 to $1,600, going by national figures. A single coat of two-part epoxy, about what a recoat lays down, runs $4.10 to $4.90 a square foot in South Bend, and taking a failed coating off adds about $1 to $2 a square foot before the new floor goes down.
| Job | Range | Per sq ft |
|---|---|---|
| Epoxy floor repair, US | $500 to $1,600 | n/a |
| Single epoxy coat, 440 sq ft | $1,800 to $2,160 | $4.10 to $4.90 |
| Old coating removal | n/a | $1 to $2 added |
| New epoxy floor, 440 sq ft | $3,660 to $5,970 | $8.30 to $13.55 |
| Resurfacing, US | n/a | $3 to $7 |
The 440 sq ft rows are for zip 46601, 2026, with no grinding. The single coat assumes a washed slab, the new floor an etched one. The removal row is a Texas cost guide figure, the only published one. Rows marked US are national.
We would usually go with just fixing the two spots and recoating, since redoing the entire floor is rarely cost effective. Unless the damage is too wide to fix in spots, we would suggest this option in almost every case.
Patch, Recoat or Start Over?
Patch or Recoat
It comes down to the amount of patching. If it’s just a few chips and the floor itself is firm, then a patch will do the work. But if it’s a dull lane, then you might consider recoating.
Grind It All Off
This fits a floor where the coating has let go over large areas, or any coating laid over old paint. Spot repairs on a floor like that keep coming back, each one next to the last. We would rather tell you that before the first patch than after it.
How a Failed Epoxy Floor Comes Off
- Find where it still holds. A scraper goes along the edges and over the worst spots to map where the coating lifts and where it is solid.
- Grind to bare concrete. Diamond tooling cuts through the old coat and the weak top skin under it, with a vacuum pulling the dust off at the cutting head.
- Find out why it failed. The ground slab gets a moisture reading in several spots. If vapor pushed the old coat off, a moisture barrier primer goes under the new one, or it will fail the same way.
- Repair the slab. Cracks and pits hidden under the old coat show up now. They get the same treatment as any garage floor crack repair, chased, filled and ground flush.
- Coat it again. Base, flake and topcoat go on as on a new floor. The car stays out until the coat has fully cured, since driving on a soft coating is how many floors fail the first time.
What affects the price
Every job is quoted after we see it. These are the things that move the number up or down.
Bond
A coat that still holds can be recoated, one that lifts has to come off
Removal
Grinding off a failed coating adds to the price per square foot
Moisture
Vapor that pushed the old coat off needs a barrier primer under the new one
Finish
A patch blends into flake and shows on a solid color
Get a quote on your epoxy floor repair, recoat and removal
Give us the rough size of the room, what the slab is doing now (stains, cracks, an old coating) and how you use the space. We call back with the system that fits and what would raise or lower the figure.
Epoxy Floor Repair, Recoat and Removal in nearby areas
Epoxy Floor Repair, Recoat and Removal FAQs
Can you put epoxy over old epoxy?
It's feasible, but the old coat must still hold strong. We usually need to check how long ago the coating was done. Usually we have to do some sanding first to give the new coat a better grip on the surface.
Why is my epoxy floor peeling?
Poor prep is a common cause. On a slab that was only washed or etched, the coat bonds to the weak top skin of the concrete and comes away with it. Oil soaked into the slab does the same.
How long does an epoxy garage floor last?
A water-based kit would last 3-5 years, but if you use 100% solids epoxy, it would be closer to 20 years. What decides is how it was done and how much salt and hot tires the floor is exposed to.
Can I rent a grinder and take the old epoxy off myself?
Generally yes, but you will also need to get a HEPA dust vacuum for the grinding. Be careful, because the dust that will be produced is called silica, which is bad for your health to breathe.
Request a quote
Quickest is a call to (574) 800-4334. Or tell us about the slab here and someone will phone you.