Concrete Patio Coating in South Bend, IN
South Bend Premier Epoxy Flooring coats concrete patios, porches and pool decks in South Bend, IN, with UV-stable systems made for slabs that sit in sun and snow. An outdoor slab gets a different coating from a garage floor, plus grit wherever feet are wet. We also work in Mishawaka, Granger, Niles, Buchanan and Edwardsburg.
Request a quote
Tell us which floor and what it looks like today. We will call you back.
Indoor slabs usually will sit on a plastic sheet as a vapor barrier, but the code does not ask for one under a patio slab, so it is critical to get a reading on the moisture of the slab. And this can be different for different seasons. Best to get advice from a flooring professional.
- Moisture readings on slabs with no plastic under them
- UV-stable polyaspartic outside, never plain epoxy
- Grit in the topcoat around pools and on steps
- Coated only on dry days above 50°F
- Leftover product and empties leave with the crew
Estimate your patio
Typical prices per square foot for South Bend jobs, from the source below. Your quote follows a look at the job.
$519 to $615
Call (574) 800-4334 for your priceAt a glance
| Item | Typical figure | Source |
|---|---|---|
| Epoxy patio, US | $800 to $4,000 for 200 to 400 sq ft | HomeGuide, epoxy flooring cost |
| Pool deck resurfacing, US | $3 to $12 per sq ft | HomeGuide, pool deck resurfacing cost |
| Clear acrylic sealer, local | $1.75 to $2.05 per sq ft | Homewyse 46601, 2026-10 |
| Wet slip rating, polyaspartic over flake | DCOF 0.63 | Simiron Polyaspartic HS PDS |
| Outdoor coating season | May through October | NOAA 1991-2020 monthly normals, South Bend airport |
| Lowest install temperature | 50°F and 5°F above the dew point | Sherwin-Williams ArmorSeal 1000 HS |
Outdoor Concrete Coating Options
Five ways to finish an outdoor slab, from a full flake coating down to a clear sealer.
Polyaspartic Flake Patios
Vinyl flakes get put into a polyaspartic base, and then a clear top goes over the flake. This process can hide dirt and grit, and can hide hairline cracks that may form over the years.
Porch and Step Coatings
Front porches take snow and whatever gets spread on the steps in January. Grit goes into the topcoat on every tread, since a smooth coated step is the one place a slip hurts most.
Pool Deck Coatings
Wet feet all summer. Grit matters more here than color. A full flake polyaspartic deck with grit in the top coat is the usual system. Where the deck bakes in sun, a cooling textured topping keeps it bearable underfoot.
Decorative Concrete Stain
The stain color soaks into the concrete and gives it a unique look with no film on top. Be sure that the concrete is washed well and etched first. This process can cost $5.35 to $6.30 per square foot in this area.
Clear Patio Sealer
It keeps the water and the stains out of your patio surface. The acrylic, sprayed on, wears off after some time, but it goes back on just as easily. That makes it a good choice in most cases.
How Much Does a Concrete Patio Coating Cost?
A concrete patio coating in South Bend runs about $8.00 to $13.15 a square foot for epoxy, or $2,400 to $3,940 for a 300 square foot patio. A clear sealer on the same patio costs $520 to $615.
| Patio job | Range | Per sq ft |
|---|---|---|
| Clear acrylic sealer, 300 sq ft | $520 to $615 | $1.75 to $2.05 |
| Decorative stain, 300 sq ft | $1,605 to $1,895 | $5.35 to $6.30 |
| Epoxy coating, 300 sq ft | $2,400 to $3,940 | $8.00 to $13.15 |
| Epoxy patio, 200 to 400 sq ft, US | $800 to $4,000 | n/a |
| Polyaspartic coating, US | n/a | $5 to $12 |
| Pool deck resurfacing, US | n/a | $3 to $12 |
| Cooling non-slip deck topping, US | n/a | $4 to $6 |
The first three rows are for zip 46601, October 2026, with the epoxy row priced for an etched slab with crack repair and no grind. Rows marked US come from national cost guides. None of them includes a moisture barrier primer or anti-slip grit.
A clear sealer can spruce up the look of a tired and gray patio, and for 300 square feet it costs $520 to $615, whereas an epoxy coating can run $2,400 to $3,940. So it depends on the look that you’re trying to get on your patio, whether you want to pay more for the epoxy coating.
How a Patio Gets Coated
- Find out what is under it. The residential code, IRC R506.2.3, does not require a vapor retarder under patios, walks or driveways, so most outdoor slabs have none. Ground moisture moves with the seasons. Readings come first, and a slab on grade gets a moisture barrier primer where the coating maker asks for one.
- Grind, not just pressure wash. Washing cleans the slab. Grinding opens the pores so the base can grip. In our view, grinding is the step an outdoor job can least afford to skip.
- Repair. Cracks are chased and filled, salt pits packed, and everything ground flush.
- Base, flake and a UV-stable top. Plain epoxy can darken or yellow in sunlight, so outside it is polyaspartic from the base up, with grit in the final coat.
- Watch the weather. The slab has to sit at 50°F or more and 5°F above the dew point, with humidity under 85%. Outdoors here that means May through October, and a heavy dew holds the start until the slab dries.
- Clean up and walk through. Leftover product and empties go with the crew, followed by a walk around the slab on how to wash it and what to keep off it.
Can You Epoxy a Driveway?
An epoxy coating poured over an entire driveway can be challenging to keep looking good, as in summertime hot tires from a car can pull up the epoxy. During the winters, the brine drips off the car and can ruin the epoxy. Snowplow blades can scrape off the epoxy. There is also no plastic under the slab, so you’re potentially dealing with wet concrete during the winter months, which can make the epoxy peel off. A short apron or a carport could possibly work for an epoxy coating. Ask your professional.
What affects the price
Every job is quoted after we see it. These are the things that move the number up or down.
Moisture readings
A slab with no plastic under it may need a moisture barrier primer
Condition
Cracks and salt pits are filled and ground before any coat
System
A clear sealer costs a fraction of a flake coating
Grit
Anti-slip aggregate in the topcoat around a pool or on steps
Get a quote on your patio and pool deck coatings
Give us the rough size of the room, what the slab is doing now (stains, cracks, an old coating) and how you use the space. We call back with the system that fits and what would raise or lower the figure.
Patio and Pool Deck Coatings in nearby areas
Patio and Pool Deck Coatings FAQs
Is a coated pool deck slippery?
Not with grit in it. One polyaspartic maker rates its coating over full flake at a wet DCOF of 0.63 under ANSI A326.3, and anti-slip aggregate in the topcoat adds more where people climb out.
Can I use rock salt on a coated porch?
Polyaspartic coating is a fast-curing substance that stays clear in the sun but is only fair against salty meltwater. Magnesium and calcium chloride can hurt concrete. Be sure to sweep it off after the ice. Rinsing it off in the spring is best.
How soon can we walk on the patio?
Curing time, enough to walk on the patio, is about 17 to 20 hours at 72 degrees Fahrenheit. If evenings are cool, this will slow it down. Plan on the next day to walk on your patio without making marks.
Can you coat a cracked or flaking patio?
Cracks should be cut and opened up first and then filled to ensure they don't come back, before any coating goes on. Resurfacing a flaking slab can cost anywhere from $3 to $7 per square foot nationally.
Do I need a contractor to seal a patio?
No, a clean, uncracked concrete patio can be done by most owners, with a good sweeping, washing, and covering the plants, if any. There is no grinding needed for a sealer. If it's a flake, color or pool deck job, it might be better to hire it out.
Will a patio coating survive our winters?
Since there are approximately 126 freezing nights per year here, a coating on a weak top skin can let go during these freezing and thawing days and nights. Grinding the slab first matters more outside because it cuts off the top skin, which can allow the patio coating to survive our winters better.
Request a quote
Quickest is a call to (574) 800-4334. Or tell us about the slab here and someone will phone you.